DRK-07C 45° Gwajin Cire Harshe

DRK-07C (ƙananan 45º) ana amfani da gwajin aikin gwajin wuta don auna yawan kona kayan sakawa a cikin 45º. Na'urar kwamfuta ce ke sarrafa wannan kayan aiki, kuma halayensa sune: daidaito, kwanciyar hankali, da aminci.
Yarda da ka'idoji: ƙira da kera sigogin fasaha da aka ƙayyade a cikin GB/T14644 da ASTM D1230.

Na farko. Gabatarwa
DRK-07C (ƙananan 45º) ana amfani da gwajin aikin gwajin wuta don auna yawan kona kayan sakawa a cikin 45º. Na'urar kwamfuta ce ke sarrafa wannan kayan aiki, kuma halayensa sune: daidaito, kwanciyar hankali, da aminci.
Yarda da ka'idoji: ƙira da kera sigogin fasaha da aka ƙayyade a cikin GB/T14644 da ASTM D1230.

Na biyu, manyan alamomin fasaha na mai gwada aikin jinkirin harshen wuta
1. Tsawon lokaci: 0.1 ~ 999.9s
2. Daidaiton lokaci: ± 0.1s
3. Gwajin tsayin harshen wuta: 16mm
4. Wutar lantarki: AC220V± 10% 50Hz
5. Ƙarfin wuta: 40W
6. Girma: 370mm × 260mm × 510mm
7. Nauyi: 12Kg
8. Matsin gas: 17.2kPa ± 1.7kPa
DRK-07C 45°Gwajin Retardant na Flame800.jpg

Na uku. Tsare-tsare don shigarwa da amfani da mai gwada aikin jinkirin wuta
1. Ya kamata a shigar da kayan aiki a cikin yanayi mai kyau don kawar da hayaki da iskar gas masu cutarwa da aka haifar a lokacin gwaji a cikin lokaci.
2. Bincika ko sassan kayan aiki suna faɗuwa, kwance ko sun lalace yayin sufuri, kuma daidaita su.
3. Haɗin kai tsakanin tushen iska da kayan aiki ya kamata ya kasance mai ƙarfi kuma abin dogaro, kuma kada a ƙyale zubar iska don tabbatar da amincin gwajin.
4. Dole ne a yi ƙasa a dogara da kayan aiki, kuma dole ne a shigar da waya ta ƙasa daban.
5. The zafin jiki ne 20 ℃ ± 15 ℃, da dangi zafi ne <85%, kuma babu m matsakaici da conductive ƙura a kusa da.
6. Ya kamata a gudanar da mujallar kwararru da fasaha, kuma ya kamata a sarrafa kuma a yi amfani da su kuma a yi amfani da su sosai daidai da umarnin.