Gwajin Nadawa DRK111

DRK111 Foldability Tester, kayan aikin yana ɗaukar fasahar sarrafa hoto don sanya chuck ɗin nadawa ya dawo ta atomatik bayan kowane gwaji, wanda ya dace da aiki na gaba. Kayan aiki yana da ayyuka masu sarrafa bayanai masu ƙarfi: ba zai iya canza adadin nau'ikan nau'ikan nau'ikan samfuri guda biyu kawai da ƙimar logarithmic daidai ba, amma kuma yana ƙididdige bayanan gwaji na samfurori da yawa a cikin rukuni ɗaya, kuma yana iya ƙidaya matsakaicin matsakaicin ƙimar mafi ƙarancin. , Matsakaicin ƙima da ƙima na bambance-bambance, ana adana waɗannan bayanan a cikin microcomputer, kuma ana iya nunawa ta bututun dijital. Bugu da ƙari, kayan aiki kuma yana da aikin bugu. Haɗaɗɗen tsari ne na gani-electromechanical, wanda zai iya ƙidaya ta atomatik adadin ninki biyu na samfurin da aka gwada.

Babban Manufar:
Kayan aiki ne na musamman don auna ƙarfin nadawa na takarda, kwali da sauran kayan takarda (bakin ƙarfe a cikin masana'antar lantarki, da sauransu) tare da kauri na ƙasa da 1mm. An fi amfani da shi a masana'antar katako, cibiyoyin dubawa masu inganci da sassan binciken takarda na jami'o'i da kwalejoji don gwada juriyar juriyar takarda da kwali.

Matsayin Fasaha:
GB/T 2679.5 “Ƙaddarar Juriya na Nadawa na Takarda da Board (MITNadawa GwajinHanyar)"
GB/T 457-2008 "Ƙaddara Ƙaddamar Jurewar Naɗi na Takarda da Kwali"
TS EN ISO 5626 Takarda - Tabbatar da juriya na nadewa

Sigar Fasaha:
1. Ma'auni: 0～99999 sau
2. Matsakaicin nadawa: 135± 2°
3. Saurin nadawa: 175 ± 10 sau / min
4. Nisa na shugaban nadawa shine: 19 ± 1mm, da radius mai nadawa: 0.38 ± 0.02mm.
5. Spring tashin hankali: 4.91 ~ 14.72N, duk lokacin da 9.81N tashin hankali ne amfani, da spring matsawa ne a kalla 17mm.
6. Nisa tsakanin buɗewar ninka shine: 0.25, 0.50, 0.75, 1.00mm.
7. Print fitarwa: na zamani hadedde thermal printer
8. Babban kauri mai kauri: (0.1 ~ 2.30) mm
9. Babban nisa nisa: (0.1 ~ 16.0) mm
10. Yankin ƙarfi na sama: 7.8X6.60mm/51.48mm²
11. Ƙarfin ƙarfi na sama: 19.95: 5.76-Wid9.85mm
12. Daidaitaccen matsayi tsawo na samfurin: 16.0mm
13. Ƙananan nadawa chuck: Canjin tashin hankali da ke haifar da jujjuyawar eccentric bai wuce 0.343N ba.
14. Nisa na ƙananan nadawa shugaban shine: 15± 0.01mm (0.1-20.0mm)
15. Ƙarfin ƙwanƙwasa ƙarfi: 11.9: 4.18-Wid6.71mm
16. Nadawa radius 0.38 ± 0.01mm
17. Reproducibility: 10% (YAUSHE 30T), 8% ( LOKACIN 3000T)
18. Tsawon samfurin shine 140mm
19. Chuck nesa: 9.5mm

Daidaita kayan aiki:
1. Calibration na tashin hankali spring: sanya nauyi a kan farantin karfe da kuma lura da ko nuna alama darajar da nuna alama daidai da nauyi, duba maki uku: 4.9, 9.8, 14.7N, sau uku a kowace aya, idan akwai sabawa. , matsar da matsayi mai nuni , Sanya shi ya kai darajar gaba, idan ƙetare ƙananan ƙananan, za'a iya daidaita shi tare da madaidaicin daidaitawa mai kyau.
2.Tabbatar da canji na alamar tashin hankali: danna ma'aunin tashin hankali, sanya ma'anar ma'anar a matsayi na 9.8N, matsa samfurin mai ƙarfi tsakanin babba da ƙananan chuck, kunna na'ura kuma ninka shi sau 100. sannan a daina. A hankali juya ƙulli da hannu don sanya kan mai nadawa ya ninka baya da baya sau ɗaya, kuma lura cewa canjin ƙimar mai nuni ba zai iya wuce 0.34N ba.
3.Test da gogayya na tashin hankali sanda: sanya nauyi a kan nauyi farantin, da farko a hankali rike da tashin hankali sanda da hannu, sa'an nan sannu a hankali rage shi zuwa ma'auni matsayi, karanta F1 a kan sikelin, sa'an nan kuma ja da tashin hankali sanda saukar. Sannan sannu a hankali shakata da shi don komawa matsayin daidaito. Karatun matsayi yana nuna F2, kuma ƙarfin juzu'i na sandar tashin hankali ba zai wuce 0.25N ba. Tsarin lissafin shine kamar haka: F = (F1 - F2) /2 <0.25N

Kulawa:
1. Shafe baka na kan nadawa tare da masana'anta mai laushi mara laushi don kiyaye kayan aiki mai tsabta.
2. Lokacin da ba'a amfani da shi na dogon lokaci, da fatan za a cire filogin wuta daga soket ɗin wuta.

Lura: Saboda ci gaban fasaha, za a canza bayanin ba tare da sanarwa ba. Samfurin yana ƙarƙashin ainihin samfurin a cikin lokacin ƙarshe.