F0031 Mai Gwajin Canjin Kumfa Na atomatik

Ana amfani da wannan gwajin gwajin kumfa ta atomatik don saka idanu da yanayin iska na kayan kumfa na polyurethane. Ka'idar na'ura ita ce gwada yadda sauƙi yake da iska don wucewa ta tsarin salula a cikin kumfa. Ƙimar ƙimar iska ta ƙarshe ita ce ƙimar gwajin kai tsaye don tantance aikin tsarin saƙar zuma a cikin kumfa. F0031 mai gwajin iska an ƙera shi bisa ga ƙa'idodin ƙasashen duniya na yanzu kuma ana amfani dashi musamman don gwada kayan kumfa na polyurethane. Gwajin tashar jiragen ruwa shine 50 * 50 * 25mm. Bayan sanya samfurin, an kafa ɗakin datti, kuma ana amfani da iska mai ci gaba ta atomatik bayan an fara gwajin. Kafin fara gwajin, mai amfani zai iya saita ƙimar matsa lamba akan allon taɓawa. Bayan an fara gwajin, mai gwajin iskar iska ya kai ƙimar da aka saita a ƙayyadadden ƙimar kuma ta atomatik ya kammala gwajin.

Aikace-aikace:
Polyurethane kumfa;
Kumfa mai danko (kumfa memori)

Matsayin Fasaha:
AS 2282.14;
ASTM D3574-Gwajin G;
ISO 7231;
TS EN ISO 7231;
DIN EN ISO 7231;
TS EN ISO 7231;
JIS K6400;

Siffofin:
Sanye take da allon aiki da allon taɓawa;
Ma'aunin matsin lamba na dijital: 0-500Pa;
Matsakaicin daidaitacce kewayon;
Ana iya fitar da bayanai ta hanyar tashar RS232;
Girman tashar jiragen ruwa: 50*50*25mm
Za a iya gwada kumfa mai danko (kumfa memori);
Da sauri kuma ta atomatik nuna sakamakon;
Sakamakon gwajin daidai ne;
sauki don amfani;
Sauƙi don amfani;
0.2-20 L/min naúrar, 2-200 L/min naúrar, 5-500 L/min naúrar, tashoshi uku (na zaɓi)