Matsakaicin Allon taɓawa da Mitar ƙonewa a tsaye

Abubuwan Gwaji: Gwada aikin konewa na robobi da kayan da ba na ƙarfe ba

Na'urar gwaji da ake amfani da ita don gwada aikin konewar robobi da kayan da ba na ƙarfe ba. Ya dace da hanyar gwajin dakin gwaje-gwaje na aikin konewa na filastik da samfuran kayan da ba na ƙarfe ba a cikin yanayin harshen wuta na 50W a cikin madaidaiciya ko madaidaiciya.

1. Iyakar aikace-aikace
Na'urar gwaji da ake amfani da ita don gwada aikin konewar robobi da kayan da ba na ƙarfe ba. Ya dace da hanyar gwajin dakin gwaje-gwaje na aikin konewa na filastik da samfuran kayan da ba na ƙarfe ba a cikin yanayin harshen wuta na 50W a cikin madaidaiciya ko madaidaiciya.
2. Samfurin fasali
1. Allon taɓawa mai kulawa na shirye-shirye + kulawar PLC, gane sarrafawa / ganowa / ƙididdigewa / nunin ayyuka da yawa
2. Babban digiri na atomatik: rikodi ta atomatik na lokacin gwaji, nuni ta atomatik na sakamakon gwajin, lokaci ta atomatik, kunnawa ta atomatik, dawowa ta atomatik na Bunsen burner bayan ƙarshen harshen wuta, za ka iya zaɓar ko kashe gas.
3. Kuna iya zaɓar ko don kunna kunnawa ta atomatik lokacin farawa
4. Gaba, baya, sama da ƙasa na babban fayil ɗin salon ana iya sarrafa shi ta allon taɓawa. Fara, tsayawa, gas, lokaci, kunnawa, adanawa, adanawa, walƙiya, da shaye-shaye duk ana sarrafa su ta allon taɓawa. Ana iya kammala gwajin tare da taɓa bakin yatsa
5. Maɓallin mai ƙidayar lokaci yana aiki tare da PLC don yin rikodin ta atomatik da adana lokacin ƙonewa
6. Tsarin lokacin gwajin zai yi rikodin ta atomatik kuma ya haifar da sakamakon gwaji
3. Alamomin fasaha masu alaƙa
1. Zazzabi na yanayi: zazzabi na ɗaki～40 ℃; dangi zafi: ≤75%;
2. Supply ƙarfin lantarki da iko: 220V± 10% 50HZ ikon 150W
3. Ana iya kunna shirye-shiryen gwajin konewa a kwance da tsaye akan allon taɓawa, ana iya adana sakamakon gwajin a cikin allon taɓawa, kuma ana iya neman sakamakon gwajin;
4. Bunsen burner atomatik ƙonewa, atomatik lokaci, sabani saita lokacin ƙonewa (ana iya saiti akan allon taɓawa)
5. Bunsen burner diamita na ciki 9.5mm ± 0.5mm
6. Zaka iya zaɓar ko za a kunna ta atomatik kafin bunsen burner ya fara
7. Bayan an kunna wuta, Bunsen burner zai dawo kai tsaye, kuma za a iya dawo da bunsen burner don zaɓar ko zai kashe gas ɗin.
8. Tushen iskar gas: iskar gas mai ruwa (gas ɗin methane mai sarrafa masana'antu a lokacin sasantawa); Lura: Mai amfani ne ya samar da tushen iskar gas da shugaban haɗin gwiwa
9. Karfe farantin electrostatic fesa akwatin
10. Fiye da 0.5 cubic meters (goyan bayan 0.75m³ maras dacewa, girman 1m³ da majalisar bakin karfe)
11. Kimanin nauyin kayan aiki: 100kg
12. Wutar lantarki: 220V AC 50HZ
13. Lokaci na lokaci: 0 ~ 999.9s, daidaitattun lokaci: 10s ± 0.2s 30s ± 0.2s;
14. Harshen lokacin: 0～999.9S (daidaitacce, ana iya saita shi akan allon taɓawa)
15. Bayan lokacin harshen wuta: 0～999.9S
16. Ragowar lokacin ƙonewa: 0～999.9S
17. Ana ƙididdige ƙimar ƙona madaidaiciya (V) ta atomatik ta PLC, ana nunawa akan allon taɓawa kuma an adana shi.
18. Ƙungiya mai ƙonewa: 0 °, 20 °, 45 ° na zaɓi
19. Tsawon harshen wuta: 20mm ~ 175mm daidaitacce
20. Flame zafin jiki: (100-1000) ℃ daidaitacce
21. Gudun gas: Gudun iskar gas yana daidaitawa daga 105ml/min-1000ml/min
22. Fitilar ƙonewa: tube ciki diamita 9.5 ± 0.3mm, tsawon: 100mm ± 10mm
23. Na'urar lokaci: na iya zama daidai zuwa 0.1S
24. Daidaita matsayi: Ana iya daidaita ma'aunin samfurin sama da ƙasa, hagu da dama, za'a iya daidaita wurin konewa baya da baya, kuma bugun gyare-gyare yana da girma.
25. Na'urar daidaita harshen wuta: (na zaɓi)
a. Gwajin zafin jiki: 0 ~ 1000 ℃
b. Harshen zafin jiki na buƙatun: lokacin tashi daga 100 ℃ ± 5 ℃ zuwa 700 ℃ ± 3 ℃ yana cikin 44s ± 2s
c.Φ0.5mm (nau'in K) nickel-chromium/nickel-aluminum waya thermocouple, mai rufi zuwa ƙasa
d. Canja wurin jan karfe block: Ф5.5mm, taro 1.76g ± 0.01g
26. Tsarin ƙararrawar iskar gas (na zaɓi)
27. Girma: nisa 1160mm × zurfin 600mm × tsawo 1310 (ciki har da ƙafa) mm
28. Konewa gwajin yanki girma:> 0.5 cubic, tsawon * nisa * tsawo game da 900mm × 590mm × 1050mm, baƙar fata bango, bango haske ≤20Lux
29. saman an sanye shi da na'urar da ba za ta iya yin shiru ba, kuma tana iya fitar da hayakin hayaki da konewa ke haifarwa bayan an gama gwajin.
4. Ma'auni masu dacewa
Matsakaicin ƙira: GB-T2408-2008 “Gwajin Aiki na Ƙona Filastik-Tsarin Tsaya da Hanyar Tsaye” (ANSI/UL94 -2006)
GBT10707-2008 "Ƙaddamar da kona kaddarorin na roba" Hanyar B (watau GB-T13488 "Ƙaddamar da kona kaddarorin na roba-tsaye kona Hanyar")
Ma'auni masu aiki:
ANSI/UL94
GJB360B-2009 Hanyar gwaji don kayan lantarki da lantarki 111
GB/T5169.16-2008
Saukewa: IEC60950-1