Nau'in XC Nau'in Cantilever Beam Gwajin Tasirin Na'urar

Takaitaccen Bayani:

Ana amfani da ma'aunin tasirin tasirin cantilever don tantance ƙarfin tasirin abubuwan da ba na ƙarfe ba kamar robobi masu ƙarfi, ƙarfafa nailan, filayen filastik ƙarfafa filastik, yumbu, dutsen simintin, na'urorin filastik, da kayan rufewa.


Cikakken Bayani

Tags samfurin

Ana amfani da ma'aunin tasirin tasirin cantilever don tantance ƙarfin tasirin abubuwan da ba na ƙarfe ba kamar robobi masu ƙarfi, ƙarfafa nailan, filayen filastik ƙarfafa filastik, yumbu, dutsen simintin, na'urorin filastik, da kayan rufewa.

Ana amfani da ma'aunin tasirin tasirin cantilever don tantance ƙarfin tasirin kayan da ba ƙarfe ba kamar su robobi masu ƙarfi, ƙarfafa nailan, filayen filaye masu ƙarfi na gilashi, yumbu, dutsen simintin, na'urorin lantarki na filastik, da kayan rufewa.
Yana da halaye na babban daidaito, kwanciyar hankali mai kyau, da babban kewayon aunawa. Nau'in lantarki yana ɗaukar fasahar auna ma'aunin madauwari. Bugu da ƙari ga fa'idodin nau'in nau'in inji, Hakanan yana iya aunawa ta dijital da nuna aikin bugawa, ƙarfin tasiri, kusurwar haɓakawa, kusurwar haɓaka, Matsakaicin ƙimar tsari, asarar makamashi ta atomatik ana gyarawa.
Za'a iya amfani da na'ura na gwajin tasirin tasirin tasirin injin na'ura don gwajin tasirin tasirin cantilever a cikin cibiyoyin bincike na kimiyya, kwalejoji da jami'o'i, cibiyoyin binciken samarwa a duk matakan, da shuke-shuke samar da kayan.
Silsilar gwajin tasirin katakon katako shima yana da nau'in micro-control, wanda ke ɗaukar fasahar sarrafa kwamfuta don sarrafa bayanan gwajin kai tsaye cikin rahoton da aka buga. Ana iya adana bayanan a cikin kwamfutar don tambaya da bugu a kowane lokaci.

Matsayin Gudanarwa:
Samfuran sun cika ka'idodin ENISO180, ASTMD256, GB/T1843 don kayan gwaji.

Sigar Fasaha:
1. Ƙimar makamashi: 1J (ba daidai ba), 2.75J, 5.5J, 11J, 22J
2. Gudun tasiri: 3.5m/s
3. Tazarar muƙamuƙi: 22mm
4. Pre-girma kwana: 150°
5. Girma: tsawon 500mm × nisa 350mm × tsawo 780mm
6. Nauyi: 130kg (ciki har da akwatin kayan haɗi)
7. Wutar lantarki: AC220± 10V 50HZ
8. Yanayin aiki: tsakanin kewayon 10 ℃~35 ℃, dangi zafi ≤80%, babu vibration a kusa da, babu lalata matsakaici.
Model / kwatancen aiki na jerin XJC hade da injin gwajin tasiri:

Samfurin Tasirin Ƙarfi Tasirin Nuna Ma'auni
XC Cantilever katako 2.75J 5.5J 11J 22J Dakatar 3.5m/s Liquid Crystal Atomatik


  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana